Direct to Process Vaporizers

If steam or water are unavailable, highly energy efficient Direct to Process Vaporizers will meet all your vapor needs.

Electric Vaporizer


Features & Specifications
  • Electrical enclosure is a NEMA 3R equivalent standard for outdoor use
  • Replaceable heater platen
  • Pilot light indicator for control power & heater cycle
  • Low discharge temperature safety cut off
  • Circuit breaker load protection
  • Capacities from 15 KW to 120 KW (Other sizes available upon request)
  • Standard Electrical Requirements: 240/480 volt, 60Hz, 3 phase (others available upon request)
  • Stainless steel and floor stand available upon request.

Give us a call:
800.832.4262

Electric Pressure Vaporizers Weights & Dimensions

Model Capacity Wattage Dimensions Weight
DTP-15 350 lbs/hr 15,000 22" x 23" x 37" 265 lbs
159 kg/hr 15,000 55.9 cm x 58.4 cm x 94 cm 120 kg
DTP-30 695 lbs/hr 30,000 22" x 23" x 37" 305 lbs
315 kg/hr 30,000 55.9 cm x 58.4 cm x 94 cm 139 kg
DTP-45 1045 lbs/hr 45,000 22" x 23" x 37" 345 lbs
474 kg/hr 45,000 55.9 cm x 58.4 cm x 94 cm 157 kg
DTP-60 1395 lbs/hr 60,000 22" x 23" x 37" 375 lbs
633 kg/hr 60,000 55.9 cm x 58.4 xm x 94 cm 170 kg
DTP-75 1745 lbs/hr. 75,000 22" x 23" x 37" 385 lbs
792 kg/hr. 75,000 55.9 cm x 102 cm x 94 cm 175 kg
DTP-90 2,095 lbs/hr 90,000 26” x 45” x 43” 395 lbs
950 kg/hr 90,000 66 cm x 114.3 cm x 109.2 cm 179 kg
DTP-120 2,795 lbs/hr 120,000 27” x 48” x 43” 430 lbs
1,268 kg/hr 120,000 68.7 cm x 121.9 cm x 109.2 cm 195 kg
DTP-150 3,495 lbs/hr 150,000 27" x 73" 43" 465 lbs
1,585 kg/hr 150,000 68.7 cm x 185.4 cm x 109.2 cm 211 kg

  Note: The above DTP capacities are based on 70° discharge CO2 gas temperatures with a minimum CO2 supply pressure of 285 psig.