Ei-Series Horizontal

EA-series

The Ei-Series CO2 storage units are designed for International Customers.  The Ei design incorporates low profile saddles and strategic nozzle locations that reduce the overall height of the unit.  These units can be shipped via a 20′ or 40′ open top container (unit will be slightly over height) saving thousands in shipping costs. These efficient units are manufactured in sizes from 3.75 tons (3.4 MT) to 30 tons (27.2 MT) capacities.


General Specifications
  • Pressure vessel: Constructed in accordance with Section VIII, Division 1 of the ASME Code for Unfired Pressure Vessels for a maximum allowable working pressure (MAWP) if 350 psig (24.1 bar). 2" NPS & under tank nozzles are schedule 80 stainless steel.
  • Seismic: Per UBC 1997 seismic zone 4, importance factor of 1.25, soil profile types Sa, Sb, Sc, Sd or Se, 2km or less to a a type A seismic source. Design to other Codes available on request.
  • Piping: Schedule 80 seamless pipe, 2,000 lbs (907.20 kg) forged steel fittings, ¼ turn stainless steel isolation.
  • Safeties: Dual ASME approved direct spring operated, sized for unconfined outdoor installation. Larger capacity relief valves will be required for installation when located indoors or in a fire area.
  • Insulation: 4" (10.16 cm) Polyurethane
  • Outer jacket: .063" (0.16 cm) Aluminum
  • Vaporizers Optional: Steam, water or electric, capacities to 6,000 lbs/hr (2721.60 kg/hr)
  • Liquid level gauge: Differential pressure indicator type with 6" (15.24 cm) dial
  • Pressure gauge: 0 - 600 psig with 6" (15.24 cm) dial
  • Electrical Characteristics: Models 3.7581Ei and 681Ei use 208/220 V, 60 Hz, 1 Phase. Standard Electrical Requirements: 240/480 volt, 60Hz, 3 phase (others available upon request)
  • Control cabinet: .04" (0.1 cm) prefinished aluminum. Complete cabinet folds down for total accessibility to refrigeration unit. Add 4' (1.22 m) to length shown below for fold down clearance.
  • Manway installed for internal inspection and ease in cleaning.
  • Stainless steel nozzles and valves .

Give us a call:
800.832.4262

Horizontal Series Ei Weights & Dimensions

Model Nominal Ton Capacity Height* Length* Width* Empty Weight**
3.7581Ei 3.75 Tons 7'2" 11'0" 5'10" 7,500 lbs
3.4 MT 2.18 m 3.61 m 1.78 m 3401 kg
681Ei 6 Tons 7'2" 15'10" 5'10" 9,000 lbs
5.4 MT 2.18 m 4.83 m 1.78 m 4082 kg
148Ei 14 Tons 8'1" 19'6" 7'4" 14,000 lbs
12.7 MT 2.46 m 5.94 m 2.24 m 6350 kg
268Ei 26 Tons 8'1" 33'0" 7'4" 23,500 lbs
23.6 MT 2.46 m 10.06 m 2.24 m 10659 kg
3081Ei 30 Tons 8'1" 37'0" 7'4" 26,500 lbs
27.2 MT 2.46 m 11.28 m 2.24 m 12020 kg

*Shipping Dimensions **Weights include insulation, refrigeration unit, saddles & nozzles for a standard vessel. Actual weights may vary.